Table of Contents
Quadro is NVIDIA’s brand for professional and corporate computing. It is designed for workstations, computer-aided designing, computer-generated imagery, and digital content creation setups. Basically, Quadro Graphics Card differs from GeForce because the target market for Quadro is not the general population who will mostly play video games on it, but the professionals who produce any kind of content and utilize most of the card’s potential. Like working on unreal Engine and Other engines to make games ad render the games. Here You can Check Best Quadro Graphics Card For the Unreal engine.
The recent RTX technology has even pushed more boundaries and expanded the horizon for digital content creation and computer-generated imagery/CGI. We will be listing some of the best GPU for video editing and best GPU for rendering since Quadro is the best choice when it comes to high-level content creation, 3D designing, and CGI.
Our Top 3 Picks
Can we use Quadro graphics card for mining?
Yes, it is possible though according to some practical reasons, it may not be as profitable as you may think. We know that the Quadro lineup from NVIDIA is an optimized and specialized version of GeForce cards for certain tasks that require higher VRAM. Therefore, the performance level of a Quadro card will be comparable to the GeForce it is based on. Because basic chips are similar along with the architecture of the chip.
Best Quadro / Workstation Graphics Card
- Memory: 48GB, GDDR6
- PCI Express x16 4.0 interface
- Maximum resolution: 7680 x 4320 pixels
- Ports: 4 x DisplayPorts
- Backed by a 3 years manufacturers warranty
Overview
The top of the list Quadro RTX A6000 is an enthusiast-class performance and professional-grade graphics card from NVIDIA. The 8 nm processor chip is based on the GA102 processor. Getting into more technical details, the card houses 336 tensor cores which help accelerate the machine learning capabilities of the unit, and has 84 ray tracing acceleration cores that simulate the real-time behavior of light with real physics.
The biggest advantage Quadro RTX A6000 has over all the other Quadro (or any other graphic card even) is its 48 GB of graphics memory or VRAM. This boosts the bandwidth of the GPU a lot and helps in even faster rendering. Being a dual-slot card, it uses an 8-pin power connector in order to work. You can also easily set-up up to 4 monitor displays through DisplayPort.
Specifications
- Graphics Memory: 48 GB
- Cores: 10752
- Base Clock: 1410 MHz
- Boost Clock: 1800 MHz
- TDP: 300 W
- PSU: 700 W
Pros and Cons
- Supreme among all Quadro
- Ultimately high memory
- Comes with a hefty price
- Not very good price to performance score
- CUDA Cores: 3072 / NVIDIA Tensor Cores: 384 / NVIDIA RT Cores: 48
- GPU Memory: 16 GB GDDR6 with ECC / Bandwidth: 448 GB/Sec
- System Interface: PCI Express 3.0 x16
- Four DisplayPort 1.4 Connectors
Overview
The Quadro RTX 5000 is an excellent performance GPU from NVIDIA professional lineup. It is built using a 12 nm architecture and is based on a TU104 graphics processor. It includes 384 tensor cores which are fundamental for machine learning applications of the GPU, and 48 ray tracing accelerating cores for simulating the behavior of light based on real-time physics.
Since Quadro is targeted for workstation marketing and other professional domains where it can work for much longer hours than normal gaming environments and also ignores financial constraints compared to gaming graphic cards (where budget is side by side with performance), these are usually on much higher price bracket because of their sophisticated hardware. The card has 4 DisplayPort and 1 USB Type-C for multiple monitor set-up.
Specifications
- Graphics Memory: 16 GB
- Cores: 3072
- Base Clock: 1620 MHz
- Boost Clock: 1815 MHz
- TDP: 230 W
- PSU: 550 W
Pros and Cons
- Excellent in performance
- Better in price/performance ratio than A6000
- Unexplored gaming potential
- 24GB GDDR6 with error-correction code (ECC)
- 4x DisplayPort 1.4*
- 230 W
- 4.4” (H) x 10.5” (L) Dual Slot
- 2-way low profile (2-slot and 3-slot bridges)
Overview
The Quadro RTX A5000 is even above in performance compared to RTX 5000. It is built using 8 nm architecture and is based on a GA102 graphics processor. It includes 256 tensor cores which are fundamental for machine learning applications of the GPU, and 64 ray tracing accelerating cores for simulating the behavior of light based on real-time physics.
NVIDIA Quadro RTX GPU lineup is currently termed as the world’s most powerful ray tracing graphic card. And there is a solid reason behind that statement. The architecture used in the GA102 processor chip accelerates the ray tracing even more as compared to the older architecture. The card has 4 DisplayPort for multiple monitor set-up.
Specifications
- Graphics Memory: 24 GB
- Cores: 8192
- Base Clock: 1170 MHz
- Boost Clock: 1695 MHz
- TDP: 230 W
- PSU: 550 W
Pros and Cons
- Good Performance for the price
- Relatively affordable
- “Mid ranged” Quadro
Overview
The Quadro RTX 4000 is on the more affordable side of the Quadro lineup. It is built using a 12 nm architecture and is based on a TU104 graphics processor. It includes 288 tensor cores which are fundamental for machine learning applications of the GPU, and 36 ray tracing accelerating cores for simulating the behavior of light based on real-time physics.
The Turing architecture used in the TU104 processor chip accelerates the ray tracing up to 25x as compared to the older Pascal architecture. The card has 3 DisplayPort and 1 USB Type-C for multiple monitor set-up.
Specifications
- Graphics Memory: 8 GB
- Cores: 2304
- Base Clock: 1105 MHz
- Boost Clock: 1545 MHz
- TDP: 160 MHz
- PSU: 450 W
Pros and Cons
- Excellent price to performance ratio
- Affordable price and classic design
- No cons considering the price bracket
- NVIDIA Quadro M5000 Maxwell
- 4xDisplayport v1.2 1xDVI
- PCI Express 3.0 x16, Dual Slot, Full Height
- 8GB 256-bit GDDR5 Memory
- 150W TGP, 6 Pin Power Connector, No Rear Bracket
Overview
The Quadro M5000 is a rather older but nonetheless a performance class GPU of its time. It is built using a 28 nm architecture and is based on a GM204 graphics processor. Now that we have gotten out from the RTX series of the Quadro, there will be no raytracing or even tensor cores. This card was a general workstation-oriented GPU but was state-of-the-art of its time and even today performs great for video renderings, content creation, and video editing. An excellent choice for someone on a very low budget but wants smooth and fast video renderings.
The card has 4 DisplayPort and 1 DVI for multiple monitor set-up.
Specifications
- Graphics Memory: 8 GB
- Cores: 2048
- Base Clock: 861 MHz
- Boost Clock: 1038 MHz
- TDP: 150 W
- PSU: 450 W
Pros and Cons
- Available in Cheap
- Low power requirements
- Much Older
- Lacks Tensor Cores (and ofcourse RayTracing)
- Chipset Manufacturer NVIDIA
- Chipset Line Quadro
- Chipset Series P
- Chipset Model P1000
- Standard Memory 4 GB
Overview
The Quadro P1000 is another low-budget and relatively low-performance GPU from NVIDIA. It is built using a 14 nm architecture and is based on a GP107 graphics processor. Being older than RTX technology, this one also does not have raytracing and tensor cores. But according to its price, the performance can be considered okay.
The major downside for this card is its VRAM and lack of features that a modern-day workstation GPU should have. This can be for certain individuals who do not require those newer features such as tensor cores or ray tracing, but for just minimal tasks.
The card has 4 DisplayPort for multiple monitor set-up.
Specifications
- Graphics Memory: 4 GB
- Cores: 512
- Base Clock: 1354 MHz
- Boost Clock: 1392 MHz
- TDP: 47 W
- PSU: 200 W
Pros and Cons
- Most affordable among all the cards in the list
- Lowest power requirement (no power connector required)
- Extremely low performance (relatively)
- Low VRAM
- 1536 CUDA parallel processing cores
- 4GB GDDR5 GPU memory
- 256-bit memory interface
- 173GB/s memory bandwidth
- DVI-I DL + DVI-D DL + DP 1.2 + DP 1.2 display connectors
- Stereo connector (via included bracket)
- Drives up to four displays simultaneously
- Maximum DisplayPort resolution of 3840 x 2160 at 60Hz
Overview
The Quadro K5000is probably the oldest and lowest performance card from NVIDIA that you can still get on the market (either from very old stock, used, or a refurbished unit). It is built using a 28 nm Kepler architecture and is based on a GK104 graphics processor.
The only reason we have listed it is because of its capability for the most basic tasks in a workstation. Probably a workstation that really has no heavy or even moderate load on it. And of course, because you can get it from the market really really cheap.
The card has 2 DisplayPort and 2 DVI for multiple monitor set-up.
Specifications
- Graphics Memory: 4 GB
- Cores: 1536
- GPU Clock: 706 MHz
- TDP: 122 W
- PSU: 300 W
Pros and Cons
- For the most basic tasks
- Affordable
- Oldest in the bunch
Final Verdicts
Now, using a Quadro means that you are willing to pay the extra amount for the advantages it gives you either in the form of more tensor cores, more ray tracing accelerating cores, or more VRAM. Quadro has always been targeted towards the professional market and anyone who has used a Quadro for either their work or even in research work has never complained about its performance. The most important factor in selecting a graphic card and that too a professional-grade one is the task you need to get done from it. Because if you just want to game and are looking for a Quadro, then you are in the wrong market. The same goes for engineers or designers that are looking for some more popular gaming cards.
You now know some of the best Quadro for video editing, some of the best Quadro for rendering, or general best Quadro GPU and other such professional work. So, choose wisely.